Notify me when the price drops
We will email you if we find a lower price on this product!
Package: (2) Rockville W10K6D4 V2 10" 4000w Car Audio Subwoofers Dual 4-Ohm Sub CEA Compliant + Rockville KRYPTON-M3 4000w Max/1000w CEA RMS Mono 1 Ohm Car Amplifier Amp+Remote + Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Click Thumbnails to Enlarge Condition and WarrantyCondition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR AUDIOSAVINGS
Product Description Package Includes:Video of W10K6D4 V2:
Features:
Detailed Info:
TS Parameters:
TS Parameter Wired in Series Wired in Parallel Description of MeasurementElectrical Parameters
Re
8.28 Ohm
2.12 Ohm
Electrical voice coil resistance at DC
Le
6.483 mH
1.656 mH
Frequency independent part of voice coil inductance
L2
8.788 mH
2.229 mH
Para-inductance of voice coil
R2
12.94 Ohm
3.26 Ohm
Electrical resistance due to eddy current losses
Cmes
458.04 µF
1753.22 µF
Electrical capacitance representing moving mass
Lces
31.18 mH
8.35 mH
Electrical inductance representing drive compliance
Res
65.09 Ohm
15.58 Ohm
Resistance due to mechanical losses
fs
42.1 Hz
41.6 Hz
Drive resonance frequency
Mechanical Parameters (Using Laser)
Mms
203.734 g
190.519 g
Mechanical mass of drive diaphragm assembly including air load and voice coil
Mmd (Sd)
197.024 g
183.81 g
Mechanical mass of voice coil and diaphragm without air load
Rms
6.833 kg/s
6.974 kg/s
Mechanical resistance of total-drive losses
Cms
0.07 mm/N
0.077 mm/N
Mechanical compliance of drive suspension
Kms
14.27 N/mm
13.02 N/mm
Mechanical stiffness of driver suspension
Bl
21.09 N/A
10.424 N/A
Force factor (Bl product)
Lambda s
0.173
0.114
Suspension creep factor
Loss Factors
Qtp
0.929
0.891
Total Q-factor consider all losses
Qms
7.889
7.141
Mechanical Q-factor of of drive in free air considering Rms only
Qes
1.004
0.971
Electrical Q-factor of drive in free air considering Re only
Qts
0.89
0.855
Total Q-factor considering Re and Rms only
Other Parameters
Vas
10.6666 l
11.6894 l
Equivalent air volume of suspension
n0
0.076%
0.083%
Reference efficiency (2 pi-radiation using Re)
Lm
81.03 dB
81.41 dB
Characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom
80.88 dB
81.15 dB
Nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd
327.9 cm²
327.9 cm²
Diaphragm area
EBP
41.9
42.8
Efficiency bandwidth product
About Rockville Quality Control Procedures:Krypton Series (Product Video):
What's in the Box:
Description of KRYPTON-M3:
The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.
Our favorite feature we introduced of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).
We guarantee that this series of amplifiers will not only meet their rated power but exceed their rated power on a certified dyno test.
Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated power so you can confidently match our amplifier with high-end subs and know what to expect!
What about sound quality and efficiency though?
Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.
Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price.
Features:
Owner's Manual
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.
Item Code: (2) W10K6D4 V2+RXD-M3+RWK41
Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design